DG186AP/883
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 10Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Circuits | 1 |
| Power Dissipation | 825mW |
| Number of Inputs | 2 |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 10Ohm |
| Min Dual Supply Voltage | 10V |
| Screening Level | 38535Q/M;38534H;883B |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 21pF 17pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±15V |
| Radiation Hardening | Yes |
| RoHS Status | Non-RoHS Compliant |
DG186AP/883 Overview
This electronic part is conveniently packaged in 14-DIP (0.300, 7.62mm), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. In Through Hole, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operational temperature extended around -55°C~125°C TA. In total, there have been 14 terminations. A total of 14 pins are injected into the body of the electronic part. Multiplexers built on a SPDT switching circuit are built. There are 1 circuits in this switch device. The internal resistance of this digital multiplexer is 10Ohm. To find out what the 14 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 18VFor dual power supplies, a voltage of at least 10V should be attached. A 2 input needs to be operated.
DG186AP/883 Features
Switch Circuit: SPDT
DG186AP/883 Applications
There are a lot of Vishay Siliconix DG186AP/883 Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- Industrial
- E1 Network Equipment
- PDAs
- PCMCIA cards
- Central office
- Avionics test equipment
- Channel Banks
- Intelligent PBX
- HDTV