CY74FCT573ATPC
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74FCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 8 |
| Count Direction | BIDIRECTIONAL |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT573ATPC Overview
In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. Tube is the way it is packaged. The output it is configured with uses Tri-State. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Through Hole. In order for it to operate, it needs a supply voltage of 4.75V~5.25V. The operating temperature is -40°C~85°C. In the 74FCT series, this FPGA is located. An electronic part with 8 bits is designed. This device is designed with 20 terminations. 74FCT573 is its family. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. It is a member of the FCT family of electronic devices. The pin configuration of the device is 20. Mounting this electronic component follows the Through Hole method. In this device, there are 2 ports. Subcategory FF/Latches contains this part. There are 5V power supplies required for this machine to operate. Its 64mA output current allows for maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 100μA current from its quiescent state without being affected by external factors at all. There are 1 elements in it. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.2mA is needed for operation.
CY74FCT573ATPC Features
20-DIP (0.300, 7.62mm) package
74FCT series
8 Bits
74FCT573 family
20 pin count
20 pins
5V power supplies
1 elements
CY74FCT573ATPC Applications
There are a lot of Texas Instruments CY74FCT573ATPC Latches applications.
- Frequency
- Bus system register with enable parallel lines at bus side
- Meter applications
- Parallel Input
- Counter
- Address register
- Shift register
- PCs and Notebooks
- Counter control
- BCD counting