CY74FCT377CTSOCG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
CY74FCT377CTSOCG4 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. Currently, the output is configured to use Non-Inverted. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis used in the operation. The type of this D latch is D-Type. It belongs to the 74FCTseries of FPGAs. The list contains 1 elements. There is 200μA quiescent consumption. There have been 20 terminations. It is a member of the 74FCT377 family. It is powered from a supply voltage of 5V. Its input capacitance is 5pFfarads. It is a member of the FCTfamily of D flip flop. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 20. It has a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. There are 8bits in its design. The maximal supply voltage (Vsup) reaches 5.25V. It is imperative that the supply voltage (Vsup) is maintained above 4.75Vin order to ensure normal operation. The system runs on a power supply of 5V watts. As a result of its output current of 64mA, it is very flexible in terms of design. There are 8 output lines on it.
CY74FCT377CTSOCG4 Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT377CTSOCG4 Applications
There are a lot of Texas Instruments CY74FCT377CTSOCG4 Flip Flops applications.
- Frequency division
- Dynamic threshold performance
- Reduced system switching noise
- Patented noise
- Frequency Divider circuits
- High Performance Logic for test systems
- Cold spare funcion
- Modulo – n – counter
- Common Clocks
- Circuit Design