CSLW6B1
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module |
| Number of Pins | 5 |
| Operating Temperature | -25°C~100°C |
| Packaging | Bulk |
| Published | 2005 |
| Series | CSLW |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | Solder |
| Type | Hall Effect |
| Voltage - Supply | 4.5V~10.5V |
| Terminal Position | UNSPECIFIED |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Ratiometric, Voltage |
| Operating Supply Voltage | 10V |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Nominal Supply Current | 9mA |
| Max Supply Current | 9mA |
| Accuracy | 1.5 % |
| Response Time | 3μs |
| Coil Resistance | 160mOhm |
| Sensor Type | Hall Effect, Open Loop |
| Sensing Method | Hall Effect |
| Sensitivity | 1.02V/A |
| Max Supply Voltage (DC) | 10.5V |
| Min Supply Voltage (DC) | 4.5V |
| For Measuring | AC/DC |
| Sensitivity (mV/A) | 1020 mV/A |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
CSLW6B1 Overview
A Module package is used for the protection of the current sensors. For protection, these current sensors are packaged in a Bulk. A current sensor should provide a current no greater than 9mA. A 5 termination is present on the current sensors. In this case, the current sensors were designed for 1A current. This current sensor contains 5 pins. During operation, the current sensors could supply 10V voltage. While working, these sensors can supply a voltage of 5V. As a general rule, current sensors should supply an electrical current of 9mA. In a DC circuit, these sensors must provide voltages greater than 4.5V. In the DC circuit, the current sensors should not provide a voltage greater than 10.5V.
CSLW6B1 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~100°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 4.5V~10.5V
Module Package
CSLW6B1 Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLW6B1 Current Sensors applications.
- Home Automation
- Leakage Current Sensors
- Electrical drives
- Uninterruptable Power Supllies (UPS)
- AC variable speed drives
- Frequency, Voltage, and Solar Inverters
- OEM Current Sensing
- Inverter and H-bridge current measurements
- Battery supplied applications
- DC motor drives