CMP401GS-REEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Comparators |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CMP0401 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5/+-5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 110mW |
| Propagation Delay | 30 ns |
| Quiescent Current | 6mA |
| Response Time | 33 ns |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | ±5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 8V |
| Input Bias Current | 3μA |
| Neg Supply Voltage-Max (Vsup) | -8V |
| Current - Quiescent (Max) | 6mA1mA |
| Voltage - Input Offset (Max) | 3mV @ 5V |
| Current - Input Bias (Max) | 3μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 60dB CMRR, 60dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CMP401GS-REEL Overview
The product is packaged in 16-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with an output type of CMOS, TTL is being used.Electronic comparator is shipped by Tape & Reel (TR) .16 terminals are found on the comparator.Electronic comparator is a component of the Comparators family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as General Purpose .There are a total of 4 elements in it.The device is equipped with 16 pins.Surface Mount universial mout for easy adapting.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator has a pin count of 16 .You can find more pin-to-pin solutions for your special requirements by searching CMP0401 .There is a quiescent current of 6mA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires 2mA supply current.Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5/+-5V power supplies.From the voltage formula, the voltage gain of the part is 80dB .
CMP401GS-REEL Features
CMOS, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 6mA
Voltage Gain: 80dB
CMP401GS-REEL Applications
There are a lot of Analog Devices Inc. CMP401GS-REEL linear comparators applications.
- Power management
- Building automation
- Battery-Powered Electronics
- Hand-Held Electronics
- Laptop Computers
- Wearable Devices
- Infotainment and Clusters
- Portable and Battery-Powered Systems
- RC Timers
- Infotainment & cluster