CD74HC595DWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC595DWRE4 Overview
The device is embedded in SOIC package. There are 16 terminations on the chip. There is a Tape and Reel case containing it. A voltage of 5V is specified for the part's operating supply. It is a part that has 1 elements on it. Devices with 16 pins are available. It is recommended to mount by Surface Mount in order to get the best results. Electronic components fall under the category of HC/UH. It is noted that the operating supply voltage of this chip falls within the range 5V. A total of 8 bits are present on an IC chip. 16 pins are present on it. It is recommended that it be used at temperatures below 125°C. In order to operate the device, the value should not fall below -55°C. Under 6V, this supply voltage is employed. It is used at a voltage greater than 2V. A total of 9 output lines need to be operated.
CD74HC595DWRE4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
CD74HC595DWRE4 Applications
There are a lot of Texas Instruments CD74HC595DWRE4 Shift Registers applications.
- Delay Line
- Pseudo Random Pattern Generator
- LED matrix control
- Remote control holding register
- Cache memory in CPU
- data transfer
- Serial-to-parallel data conversion
- Remote control holding register
- Serial to parallel converter
- ROM Chips