CD74HC4520E
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Base Part Number | 74HC4520 |
| Pin Count | 16 |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 360 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 360 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 51 ns |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 0.08mA |
| Count Rate | 35MHz |
| Timing | Synchronous |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4520E Overview
It is a device supplied in the 16-DIP (0.300, 7.62mm) package. For its configuration, 16terminations are used. Having a voltage supply of 4.5Vallows it to operate in a highly flexible manner. The device contains 2terminations. There are a total of 16 pins in all components. It is packaged in a manner consistent with Tube. As part of the circuit, there are 16pins used to connect other components. To mount it, use the method of [0]. It is included in the HC/UHfamily. As a member of the 74HCseries, it is ideal for a wide range of applications. In this case, the logic type is set to [0]. Setting the operating temperature to -55°C~125°C is recommended. A mounting type of Through Holeis adopted. Providing a voltage of 2V~6Vensures higher reliability of operation. Each element in the array stores 4 bits. It is important to note that NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLEare really important features of this electronic device. Among its base part number [0], you will find additional parts that are related. The minimum supply voltage (Vsup) is as low as 2V. The frequency of the device is 60MHz. It is possible to reach a maximum supply voltage of 6VV (Vsup). The device consumes a quiescent current of 8μA volts.
CD74HC4520E Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE
Frequency of 60MHz
CD74HC4520E Applications
There are a lot of Texas Instruments CD74HC4520E Counters & Dividers applications.
- Counter control/timers
- Time delay circuits
- SQUARING
- Divide-by"N" counters/frequency synthesizers
- VHF, UHF, FM, AM, etc.
- counting/frequency sy nthesizers-BCD output
- POWER COMPUTATION
- ANALOG SIGNAL PROCESSING
- Time-delay circuits
- LINEARIZATION