CD74HC273MG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 150 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.0052 A |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 45 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Input Lines | 8 |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC273MG4 Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. It is configured with Non-Invertedas an output. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 2V~6V volts, it operates. In this case, the operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74HC series. There should be no greater frequency than 60MHzon its output. In total, there are 1 elements. The number of terminations is 20. It is a member of the 74HC273 family. It is powered from a supply voltage of 4.5V. Input capacitance of this device is 10pF farads. An electronic device belonging to the family HC/UHcan be found here. Surface Mount mounts this electronic component. Basically, it is designed with a set of 20 pins. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. It is designed with a number of bits of 8. There is a 6Vmaximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. There are 2/6V power supplies attached to it. With an output current of 5.2mA, this device offers maximum design flexibility. The number of input lines is 8. There is a consumption of 8μAof quiescent current from it.
CD74HC273MG4 Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
CD74HC273MG4 Applications
There are a lot of Texas Instruments CD74HC273MG4 Flip Flops applications.
- Guaranteed simultaneous switching noise level
- QML qualified product
- Automotive
- Asynchronous counter
- Computing
- High Performance Logic for test systems
- Event Detectors
- Single Down Count-Control Line
- Individual Asynchronous Resets
- Bounce elimination switch