CD74FCT273M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Clock Frequency | 70MHz |
| Family | FCT |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 15mA 48mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| fmax-Min | 70 MHz |
| RoHS Status | Non-RoHS Compliant |
CD74FCT273M Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. There is an embedded version in the package Tube. The output it is configured with uses Non-Inverted. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. 0°C~70°C TAis the operating temperature. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74FCT series. Its output frequency should not exceed 70MHz Hz. A total of 1elements are present in it. Despite external influences, it consumes 8μAof quiescent current. It has been determined that there have been 20 terminations. A voltage of 5V is used as the power supply for this D latch. This T flip flop has a capacitance of 10pF farads at the input. It belongs to the family of electronic devices known as FCT. Vsup reaches its maximum value at 5.25V. A normal operating voltage (Vsup) should remain above 4.75V.
CD74FCT273M Features
Tube package
74FCT series
CD74FCT273M Applications
There are a lot of Rochester Electronics, LLC CD74FCT273M Flip Flops applications.
- Data storage
- Reduced system switching noise
- Functionally equivalent to the MC10/100EL29
- Asynchronous counter
- Set-reset capability
- Shift registers
- Storage registers
- Counters
- Bounce elimination switch
- Patented noise