CD4043BDR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | CD4043 |
| Pin Count | 16 |
| Output Type | Tri-State |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 50 ns |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | S-R Latch |
| Trigger Type | HIGH LEVEL |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Input Lines | 8 |
| Independent Circuits | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4043BDR Overview
It is embedded in the 16-SOIC (0.154, 3.90mm Width) package. Tape & Reel (TR) is the way it is packaged. It is configured with an output of Tri-State. There is S-R Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. With a supply voltage of 3V~18V, it operates. There is -55°C~125°C operating temperature. It is a type of FPGA belonging to the 4000B series. This electronic part is designed with 4 Bits. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the CD4043 family. A 5V voltage supply is required for operation. With 16 pins, it is equipped. Designed with 16 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. Ensure that the supply voltage (Vsup) is greater than 3V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The device's reliable performance makes it a good choice for TR. It features maximum flexibility in design due to 6.8mA output current. Without external influences, it consumes 20μA of quiescent current. 1 circuits are used to achieve superior flexibility. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.06mA.
CD4043BDR Features
16-SOIC (0.154, 3.90mm Width) package
4000B series
4 Bits
CD4043 family
16 pin count
16 pins
CD4043BDR Applications
There are a lot of Texas Instruments CD4043BDR Latches applications.
- Four-bit storage with output enable
- Synchronous frequency dividers
- Serial Input
- Address register
- Parallel Input
- Avionics
- Multistage ripple counting
- Serial Output Register
- A/D and D/A conversion
- Buffer Storage