BTS5230GS
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13.5V |
| Reach Compliance Code | unknown |
| Base Part Number | BTS5230 |
| Pin Count | 14 |
| JESD-30 Code | R-PDSO-G14 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.8A |
| Power Supplies | 9/16V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 8A |
| Rds On (Typ) | 140m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 1.73mm |
| Length | 8.75mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
BTS5230GS Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This file is included in package 14-SOIC (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 2 outputs in the lighting driver.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.The lighting driver has Auto Restart, Status Flag features.The BTS5230 family consists of this type.It consists of 14 terminations in total.There are 2 functions of the LED driver.The maximum output current is reduced to 1.8A to meet the operation criteria.A supply voltage of 13.5V leads to high efficiency.This LED driver is equipped with a total of 14 pins.A component of this type is included in the PROFET? series.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4.5V.In this case, the power supply is 9/16V.
BTS5230GS Features
Supplied from 13.5V
BTS5230GS Applications
There are a lot of Infineon Technologies BTS5230GS Power Switches ICs applications.
- Smart Phones, Feature Phones
- Low Voltage I/O System Power
- PC Card Hot Swap
- PDAs
- Wireless Headsets
- Solid-State Drives
- Portable Video Game Players
- Notebook PC
- Set-Top Boxes
- Hot-Swap Systems