BPV23FL
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial |
| Number of Pins | 2 |
| Operating Temperature | -40°C~100°C |
| Packaging | Bulk |
| Published | 2009 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Capacitance | 48pF |
| Diode Type | PIN |
| Power Dissipation | 215mW |
| Viewing Angle | 120° |
| Forward Current | 50mA |
| Response Time | 70ns |
| Voltage - DC Reverse (Vr) (Max) | 60V |
| Rise Time | 70ns |
| Forward Voltage | 1.3V |
| Fall Time (Typ) | 70 ns |
| Max Reverse Voltage (DC) | 60V |
| Reverse Breakdown Voltage | 60V |
| Reverse Voltage | 60V |
| Wavelength | 950nm |
| Dark Current | 2nA |
| Spectral Range | 870nm ~ 1050nm |
| Active Area | 4.4mm2 |
| Current - Dark (Typ) | 2nA |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
BPV23FL Overview
These photodiodes are packaged in the Bulk to protect them from damage. For safety reasons, the photodiodes are packaged in Radial packages. When reverse-bias is applied continuously, the photodiodes are able to withstand only 60V voltage. A continuous voltage of 60V should not be applied to the photodiodes in reverse-bias mode. 2 pins are present on the photodiodes. There was the possibility that photodiodes in a circuit would emit 215mW heat. Photodiode operation should take place at temperatures below 100°C. However, the minimum operating temperature of the photodiodes should be set to -40°C. Photodiodes should have a reverse anode voltage of 60V. Photodiodes require an electric potential of 1.3V in order to conduct current. The photodiodes provided 60V when reverse-biased. Even in the absence of light input, a photodiode occurs 2nA current.
BPV23FL Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: Through Hole
Spectral Range: 870nm ~ 1050nm
Response Time: 70ns
Viewing Angle: 120°
BPV23FL Applications
There are a lot of Vishay Semiconductor Opto Division BPV23FL Photodiodes applications.
- Infrared data transmission
- Pure UV-C Monitoring
- Light Bariers
- Pulse Oximetry
- Low Cost Light Monitoring
- Range finding
- Health Monitoring
- Measurement Levelling
- Machine Controls
- YAG laser detection