BPV10
| Parameters | |
|---|---|
| Reverse Breakdown Voltage | 60V |
| Wavelength | 920nm |
| Max Junction Temperature (Tj) | 100°C |
| Peak Wavelength | 920 nm |
| Reverse Voltage (DC) | 60V |
| Ambient Temperature Range High | 100°C |
| Dark Current | 1nA |
| Spectral Range | 380nm ~ 1100nm |
| Active Area | 0.79mm2 |
| Current - Dark (Typ) | 1nA |
| Height | 12.1mm |
| Length | 8.6mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 19 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial |
| Number of Pins | 2 |
| Operating Temperature | -40°C~100°C |
| Packaging | Bulk |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Capacitance | 11pF |
| Max Power Dissipation | 215mW |
| Diode Type | PIN |
| Power Dissipation | 215mW |
| Viewing Angle | 40° |
| Forward Current | 50mA |
| Lens Style | Clear |
| Response Time | 2.5 ns |
| Bandwidth | 250MHz |
| Voltage - DC Reverse (Vr) (Max) | 60V |
| Breakdown Voltage | 60V |
| Rise Time | 2.5ns |
| Forward Voltage | 1.3V |
| Fall Time (Typ) | 2.5 ns |
| Max Reverse Voltage (DC) | 60V |
BPV10 Overview
These photodiodes are packaged in the Bulk to protect them from damage. A safety package containing the photodiodes is provided for their protection. A continuous reverse-bias mode can only sustain 60V voltage per photodiode. In reverse-bias mode, the voltage for the photodiodes should not exceed 60V continuously. Pins 2 are present on the photodiodes. Photodiodes on a circuit are capable of emitting 215mW heat. While photodiodes are operating, the temperature should not exceed 100°C. However, the minimum operating temperature for the photodiodes should be set at -40°C. For the photodiodes, the reverse anode voltage should be 60V. A circuit should have a maximum heat release rate of 215mW from the photodiodes. In the DC circuit, the photodiodes can function properly with a reverse voltage of 60V. Current should flow across a photodiode at 1.3V. Ensure that the breakdown voltage of the photodiode is the same as 60V. The current in a photodiode is 1nA even when there is no light input.
BPV10 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: Through Hole
Spectral Range: 380nm ~ 1100nm
Response Time: 2.5 ns
Viewing Angle: 40°
BPV10 Applications
There are a lot of Vishay Semiconductor Opto Division BPV10 Photodiodes applications.
- High speed photo detectors
- Vision Controls
- Electronic Equipment
- Low Capacitance
- YAG laser detection
- Infrared remote control
- Heart Rate Monitoring
- Solar Cells
- Position sensing
- Machine Controls