AUIR3314
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 9mOhm |
| Subcategory | Peripheral Drivers |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | AUIR3314 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 6/26V |
| Voltage | 37V |
| Interface | On/Off |
| Current | 18A |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 55 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 5A |
| Rise Time | 8μs |
| Fall Time (Typ) | 20 μs |
| Nominal Input Voltage | 32V |
| Turn-Off Delay Time | 140 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~32V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 9m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 16.51mm |
| Length | 10.67mm |
| Width | 4.83mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIR3314 Overview
The LED driver's packaged as a Tube.There is a TO-220-5 package that includes it.The LED driver is mounted as Through Hole.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It comes under the family of AUIR3314.A total of 5 terminations have been found in it.In order to operate, 5 pins are used.It is important to note that the LED driving board has 1 functions.It is possible to achieve a high level of efficiency with a supply voltage of 14V.It is positioned in the direction of Surface Mount, Through Hole.Currently, the LED driving board has 9mOhm resistance.It belongs to the Automotive, AEC-Q100 series.This case results in a 18A output current.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 6/26V.
AUIR3314 Features
Supplied from 14V
Resistance of 9mOhm
AUIR3314 Applications
There are a lot of Infineon Technologies AUIR3314 Power Switches ICs applications.
- Wearable Devices
- Hot Swap
- Wireless/Networking Cards
- USB Protection
- Various applications equipped with buttons
- USB Ports/Hubs
- PC Card Hot Swap
- Storage (HDDs, SSDs)
- Portable GPS
- Hot-Swap Systems