AUIPS7125RTRL
| Parameters | |
|---|---|
| Factory Lead Time | 23 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 24mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Base Part Number | AUIPS7125R |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.8A |
| Power Supplies | 28V |
| Voltage | 60V |
| Interface | On/Off |
| Current | 3.8A |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 3.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 60V |
| Output Polarity | INVERTED |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 30 μs |
| Rds On (Typ) | 24m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 2.39mm |
| Length | 6.73mm |
| Width | 6.22mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AUIPS7125RTRL Overview
Tape & Reel (TR) is how it's packaged.This package is included in TO-252-5, DPak (4 Leads + Tab), TO-252AD.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver is equipped with 1 outputs.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.It comes under the family of AUIPS7125R.As a result, there are 4 terminations.In order to operate, the 5 pins are used.It consists of 1 functions.In order to meet the operation criteria, the maximum output current drops to 3.8A.It is possible to achieve a high level of efficiency with a supply voltage of 28V.As a result, it is mounted in the manner of Surface Mount.Lighting drivers with 24mOhm resistance are used.A component of this type is included in the Automotive, AEC-Q100 series.The output current is set to 3.8A in this case.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.This part is powered by 28V.
AUIPS7125RTRL Features
Supplied from 28V
Resistance of 24mOhm
AUIPS7125RTRL Applications
There are a lot of Infineon Technologies AUIPS7125RTRL Power Switches ICs applications.
- Mobile Communication Devices
- Hot-Swap Systems
- USB Ports/Hubs
- Telecom and Network Systems
- PDAs
- Hot Swap
- Portable/Handheld Devices
- Portable GPS Device
- USB Power Distribution
- Wireless/Networking Cards