ATTINY412-SSNR
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | tinyAVR™ 1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATTINY412 |
| JESD-30 Code | R-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Oscillator Type | Internal |
| Number of I/O | 6 |
| Speed | 20MHz |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Clock Frequency | 20MHz |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 4K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 6x10b; D/A 1x8b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 2048 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 16 |
| Low Power Mode | YES |
| RAM (words) | 256 |
| Number of Timers | 3 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
ATTINY412-SSNR Overview
There is an option to purchase it in the 8-SOIC (0.154, 3.90mm Width) package, which saves space. Surface Mount is the way to mount it. You can find it in the package of Tape & Reel (TR). A AVR core processor powers the device. The temperature should be kept at -40°C~105°C TA while working. There is FLASH program memory in it. There are 6 I/Os on it, which makes it a very simple device. A comparable component can be found by using the base part number ATTINY412. The terminals of this device are set to DUAL. A 8 termination is contained within it. It is a member of the tinyAVR? 1 series of electrical components. Because of the 5V voltage of the supply, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. In the device, the clock runs at 20MHz. Vsup should be kept above 4.5V for normal operation. There is an oscillator type Internal used in this circuit.
ATTINY412-SSNR Features
8-SOIC (0.154, 3.90mm Width) package
Mounting type of Surface Mount
ATTINY412-SSNR Applications
There are a lot of Microchip Technology ATTINY412-SSNR Microcontroller applications.
- Fax machines
- Ipod
- Home appliances
- Printers
- Automatic staplers
- Dialysis machines (performs function of liver)
- Petrochemical
- Volt meter
- Nintendo
- Leakage current tester