ATSAM3X4CA-AU
| Parameters | |
|---|---|
| Factory Lead Time | 3 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | SAM3X |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 84MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATSAM3X |
| Operating Supply Voltage | 3.6V |
| Interface | CAN, Ethernet, I2C, IrDA, LIN, MMC, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 63 |
| RAM Size | 64K x 8 |
| Memory Type | FLASH, ROM |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, Ethernet, I2C, IrDA, LINbus, Memory Card, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 1 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 4 |
| Number of DAC Channels | 2 |
| Height | 1.45mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAM3X4CA-AU Overview
For the purpose of saving space, it is available in the 100-LQFP package. A Surface Mount mounting method is used. This item can be found in package Tray. Device with ARM? Cortex?-M3 core processor issupported. Work should be done at -40°C~85°C TA. There is FLASH program memory in it. 63 I/Os can be found on it. It has a part number of ATSAM3X that can be used to locate similar components. The terminals of this device are located at QUAD. This circuit consists of 100 terminationals. It is a member of the SAM3X series of electrical components. By using a 1.8V voltage supply, high efficiency is possible. As far as data storage is concerned, FLASH, ROM is used as the memory type. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 100 pins are required to construct this device. Microcontrollers contains this component. The devices have a memory size of 256kB that can be used to store programs and data. Its core architecture is ARM. Using a frequency of 84MHz, it is very efficient. The supply voltage of 3.6V's adaptability can be fully utilised by designers. A total of 1 timers/counters are present. It is one of the members of the CPU family CORTEX-M3. The oscillator type Internal is used to operate the device.
ATSAM3X4CA-AU Features
100-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAM3X4CA-AU Applications
There are a lot of Microchip Technology ATSAM3X4CA-AU Microcontroller applications.
- Oscilloscopes
- Magnetic resonance imaging (MRI)
- Smoke alarms
- Toys
- Traditional industrial transformation
- Toasters
- Microwave ovens
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Torpedo guidance
- Industrial instrumentation devices