AP2151SG-13
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 115MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 800mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AP2151 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Power Supplies | 3/5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 95m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.5mm |
| Length | 4.95mm |
| Width | 3.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AP2151SG-13 Overview
It is packaged in the manner of a Tape & Reel (TR).It is included in the package 8-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.This switch is of type USB Switch.To ensure reliable operation, set the temperature to -40°C~85°C TA.There is a default setting of 1 for output.A voltage of Not Required is used to power it.A maximum output voltage of P-Channel volts can be achieved by this LED driver.The lighting driver has Status Flag features.It belongs to the AP2151 family.In total, there are 8 terminations.In order to operate, 8 pins are used.Currently, the lighting driver has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 500mA.With a supply voltage of 5V, high efficiency is possible.It is mounted in the way of Surface Mount.In total, it has 8 pins.Currently, the LED driving board has 115MOhm resistance.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In this part, the power supply is set to 3/5V.
AP2151SG-13 Features
Supplied from 5V
Resistance of 115MOhm
AP2151SG-13 Applications
There are a lot of Diodes Incorporated AP2151SG-13 Power Switches ICs applications.
- Hard Disk Drives
- Wireless Modem Data Cards
- Hot Swap
- Set-Top Boxes
- Gaming
- Portable Video Game Players
- Mobile Communication Devices
- Wireless/Networking Cards
- HDD and SSD
- Solid-State Drives