ALD2321BSCL
| Parameters | |
|---|---|
| Min Operating Temperature | 0°C |
| Max Power Dissipation | 600mW |
| Output Type | CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 180μA |
| Output Current | 50mA |
| Max Supply Current | 180μA |
| Quiescent Current | 180μA |
| Response Time | 1.1 μs |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 4V~10V ±2V~5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 500μV |
| Max Input Current | 20pA |
| Input Bias Current | 20pA |
| Current - Quiescent (Max) | 180μA |
| Voltage - Input Offset (Max) | 0.5mV @ 5V |
| Current - Input Bias (Max) | 20pA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 75dB PSRR |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| Series | EPAD® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
ALD2321BSCL Overview
For convenience, it is packaged in 16-SOIC (0.154, 3.90mm Width) .Output type CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL is used for this comparator.This package has been designed with Tube .It's a typical General Purpose comparator.The total number of elements is 2 .In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator consists of 16 pins.There is a quiescent current of 180μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 180μA when using the device.A current supply greater than 180μA may result in the comparator malfunctioning.You are allowed to input a maximum current of 20pA into the device.Comparator electronics is not recommended to operate at a temperature higher than 70°C .Temperatures below 0°C are not suitable for the device.A comparator's maximum supply voltage is 10V .There is a minimum supply voltage of 3V for this comparator.For the output quality to be maintained, 2 channels work together.Comparator electronics is a comparator part from the EPAD? series.
ALD2321BSCL Features
CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA
ALD2321BSCL Applications
There are a lot of Advanced Linear Devices Inc. ALD2321BSCL linear comparators applications.
- General-Purpose Portable Devices
- Infotainment and Clusters
- Set Top Boxes
- Ultra-Low Power Systems
- Wide Range VCO; MOS Clock Timers
- High-Speed Sampling Circuits
- Window Comparators
- DC/DC and AC/DC power supplies
- RC Timers
- Handheld Instruments