ADG723BRM-REEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Additional Feature | ALSO OPEARTES AT 5 V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG723 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Throw Configuration | SPST |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 7pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 14ns, 6ns (Typ) |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -97dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 11ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
ADG723BRM-REEL Overview
Presented in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 8. As a result of its 2 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. A total of 8 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. Try searching with ADG723 if you're looking for variants. There is 4Ohm internal resistance in this digital multiplexer. For functions related to 8 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. It is recommended to use 1.8V as the lowest voltage for the electrical part. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. This analog switch ic utilizes SEPARATE OUTPUT output. Additional features of the electronic component include: ALSO OPEARTES AT 5 V SUPPLY.
ADG723BRM-REEL Features
2 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 200MHz
Additional Features: ALSO OPEARTES AT 5 V SUPPLY
ADG723BRM-REEL Applications
There are a lot of Analog Devices Inc. ADG723BRM-REEL Analog Switches & Multiplexers ICs applications.
- SONET
- RGB switches
- Digital cross connects (DSX-1)
- Multi-Line E1 Interface Cards
- CSU
- Audio signal routing
- Battery-powered systems
- Transmit
- Microwave transmission systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8