ADG721BRMZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Additional Feature | ALSO OPEARTES AT 5 V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG721 |
| Pin Count | 8 |
| Polarity | Non-Inverting |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1nA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 14 ns |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 6 ns |
| On-State Resistance (Max) | 4Ohm |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 7pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 14ns, 6ns (Typ) |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -97dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 11ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Normal Position | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG721BRMZ-REEL7 Overview
This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. Totally, there are 8 terminations. High-quality output is provided by the electronic component's 2 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. As part of its design, the 8 series is equipped with this electronic component. Multiplexers built on a SPST - NO switching circuit are built. Try searching for ADG721 variants of the analog switch ic. There is 4Ohm internal resistance in this digital multiplexer. To find out what the functions of 8 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The digital multiplexer has a low cost Single supply. 1.8V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 1nA current would be sufficient. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. Putting voltage greater than 1μA on the multiplexer may cause damage. This switch operates within the bandwidth of 200MHz. Don't miss this electronic component's additional features, such as: ALSO OPEARTES AT 5 V SUPPLY.
ADG721BRMZ-REEL7 Features
2 Channels
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 200MHz
Additional Features: ALSO OPEARTES AT 5 V SUPPLY
ADG721BRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG721BRMZ-REEL7 Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Signal routing between systems
- Routers
- Microprocessor Controlled Analog Systems
- Audio and video switching
- High speed data transmission line cards
- Medical
- Fault Tolerant Systems
- Video switching
- Fiber In The Loop (FITL)