ADG619BRTZ-500RL7
| Parameters | |
|---|---|
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 0.7Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 120ns, 75ns |
| Charge Injection | 110pC |
| Channel-to-Channel Matching (ΔRon) | 700m Ω |
| Crosstalk | -67dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 10μW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG619 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1nA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 10μW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 120 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±2.7V~5.5V |
| Supply Type | Dual, Single |
| Bandwidth | 190MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 75 ns |
| Max Dual Supply Voltage | 5.5V |
| On-State Resistance (Max) | 6.5Ohm |
| Min Dual Supply Voltage | 2.7V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
ADG619BRTZ-500RL7 Overview
Packed in SOT-23-8, the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. A total of 8 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. A 5V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 8 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Search with ADG619 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 6.5Ohm. To find out what the 8 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 2.7V. The analogue multiplexer could operate on 1nA current. A voltage higher than 1μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 5.5VA dual power supply should have at least 2.7V voltage attached. In 190MHz-bandwidths, data can be transferred. The analogue multiplexer has 2 outputs.
ADG619BRTZ-500RL7 Features
1 Channels
Switch Circuit: SPDT
1nA Supply Current
Bandwidth: 190MHz
ADG619BRTZ-500RL7 Applications
There are a lot of Analog Devices Inc. ADG619BRTZ-500RL7 Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Automotive applications
- Video switching
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Modems
- Industrial
- Private Branch Exchange (PBX)
- E1 Multiplexer
- Digital cross connects (DSX-1)
- High reliability control systems