ADG507AKRU
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 300Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 22pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
ADG507AKRU Overview
This electronic part is conveniently packaged in 28-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tube. In Surface Mount, you'll find this switch device. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. There are 28 terminations totally. The electronic part provides high-quality output because it has 8 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. It is injected into the electrical part body with 28 pins. It consists of 2 circuits. Integrated with DIFFERENTIAL MULTIPLEXER analog IC.
ADG507AKRU Features
8 Channels
ADG507AKRU Applications
There are a lot of Rochester Electronics, LLC ADG507AKRU Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- ATM
- Relay replacements
- Multi-Line E1 Interface Cards
- T1/E1 Terminals
- Channelized and Unchannelized DS3 applications
- Wireless Local Loop
- Intelligent PBX
- Cable Modem
- Audio and video switching