ADCMP607BCPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 62mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP607 |
| Pin Count | 12 |
| Qualification Status | Not Qualified |
| Output Type | CML, Complementary, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 25mA |
| Nominal Supply Current | 25mA |
| Power Dissipation | 62mW |
| Output Current | 50mA |
| Propagation Delay | 2.1 ns |
| Quiescent Current | 1.5mA |
| Response Time | 2.1 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 1.5mA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP607BCPZ-R7 Overview
The product is packaged in 12-WFQFN Exposed Pad, CSP for ease of transportation.The comparator has a type CML, Complementary, Rail-to-Rail output.This package has been designed with Tape & Reel (TR) .The comparator has 12 terminals.The component belongs to the Comparator family of electrical components.With a 2.5V voltage supply, the comparator can perform multiple demanding tasks.When it comes to types, this comparator is a typical with Latch .Electronic comparator consists of 1 elements in total.The pinout of the component starts from 12 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 12 .You can find more pin-to-pin solutions by searching ADCMP607 .A quiescent current of 1.5mA is observed in this comparator.Normal operation of the device requires 25mA supply current.A power supply of 3/5V is sufficient for the operation of the device.You are allowed to input a maximum current of 5μA into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 85dB .
ADCMP607BCPZ-R7 Features
CML, Complementary, Rail-to-Rail output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.5mA
Voltage Gain: 85dB
ADCMP607BCPZ-R7 Applications
There are a lot of Analog Devices Inc. ADCMP607BCPZ-R7 linear comparators applications.
- General Purpose Low Voltage Applications
- Threshold Detectors
- Industrial
- Mobile Phones
- Mobile Communications
- Point of load regulators
- Power management
- Set Top Boxes
- Wearable Devices
- Alarm and Monitoring Circuits