AD96687BR
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Comparators |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD96687 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, ECL, Open-Emitter |
| Number of Elements | 2 |
| Nominal Supply Current | 18mA |
| Power Dissipation | 240mW |
| Output Current | 30mA |
| Propagation Delay | 3.5 ns |
| Quiescent Current | 18mA |
| Response Time | 2.5 ns |
| Common Mode Rejection Ratio | 90 dB |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Average Bias Current-Max (IIB) | 13μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Dual Supply Voltage | 6.5V |
| Input Bias Current | 10μA |
| Current - Quiescent (Max) | 18mA36mA |
| Voltage - Input Offset (Max) | 2mV @ -5.2V 5V |
| Current - Input Bias (Max) | 10μA @ -5.2V5V |
| CMRR, PSRR (Typ) | 90dB CMRR, 70dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD96687BR Overview
The product is packaged in 16-SOIC (0.154, 3.90mm Width) for ease of transportation.Output type Complementary, ECL, Open-Emitter is used for this comparator.The chip is packaged with Tube .The comparator has 16 terminals.The electrical component in this case belongs to the Comparators family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.In terms of type, this is a typical with Latch comparator.Electronic comparator consists of 2 elements in total.Electronic comparator includes 16 pins.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -25°C~85°C .16 pins are available on the comparator.Alternatively, you may search for AD96687 to find more pin-to-pin solutions for your specific needs.There is 18mA current flowing in this comparator.Normal use of the device should require a nominal supply current of 18mA .
AD96687BR Features
Complementary, ECL, Open-Emitter output capability
with Latch IC
Employing 2 elements
Operates under -25°C~85°C
Quiescent Current: 18mA
AD96687BR Applications
There are a lot of Analog Devices Inc. AD96687BR linear comparators applications.
- Point of load regulators
- System control and monitoring
- Wearable Devices
- Battery management and protection
- Factory automation & control
- Battery-Powered Electronics
- Infotainment and Clusters
- RC Timers
- General-Purpose, Low-Voltage Applications
- Laptop Computers