AD8666WARZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8666 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 3.1mA |
| Quiescent Current | 1.55mA |
| Slew Rate | 3.5V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 5V~16V ±2.5V~8V |
| Output Current per Channel | 140mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 4MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 103.23dB |
| Average Bias Current-Max (IIB) | 0.00055μA |
| Power Supply Rejection Ratio (PSRR) | 115dB |
| Voltage - Input Offset | 600μV |
| Input Voltage Noise Density | 10nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8666WARZ-RL Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. Op amp ic rates 2.5mV for input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 3.1mA and 10 . Voltage gain should remain at 103.23dB. 2 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. Automotive corresponds to the op amp's series. Buffer amplifier has a quiescent current of 1.55mA.
AD8666WARZ-RL Features
8 Pins
supply voltage of 5V
103.23dB voltage gain
Output Type: Rail-to-Rail
AD8666WARZ-RL Applications
There are a lot of Analog Devices Inc. AD8666WARZ-RL Instrumentational OP Amps applications.
- Signal amplification
- High input resistance broadband
- High-frequency data acquisition systems
- Multimedia playback equipment
- Scintillation detectors
- Television
- Voltage regulation circuit
- Communication
- Power control
- High speed sample