89HPEB383ZBNQ
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Number of Pins | 132 |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 132 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.05V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 132 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | PCI Express |
| uPs/uCs/Peripheral ICs Type | BUS CONTROLLER, PCI |
| Frequency (Max) | 33MHz |
| Data Bus Width | 32b |
| Bus Compatibility | ISA; PCI; SBUS; VGA; USB |
| Data Transfer Rate-Max | 2500 MBps |
| Height | 900μm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 900μm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
89HPEB383ZBNQ Overview
There are 132 terminations on it.Be sure to set the device to 1.05V.The device has a total of 132pins.Operation is carried out using the 132pins.The device is mounted by Surface Mount.A minimum working temperature of 0°Cis required to ensure the reliability of the unit.In order to maintain consistency, a maximum value of 85°Cis recommended.It is assumed that the interface IC conducts when its supply voltage is 5V.There are BUS CONTROLLER, PCI uPs/uCs/Peripheral ICs integrated into this device.
89HPEB383ZBNQ Features
Set the part at 1.05V volts
BUS CONTROLLER, PCI of uPs/uCs/Peripheral ICs Type
89HPEB383ZBNQ Applications
There are a lot of Integrated Device Technology (IDT) 89HPEB383ZBNQ Specialized Interface ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- Battery-powered systems
- Ultrasound
- Mechanical reed relay replacement
- Relay Replacement
- Video switching
- Microprocessor Controlled Analog Systems
- Medical/Industrial
- Fiber–Fiber In The Loop (FITL), Fiber to the Home
- ATM and Frame Relay Equipment