74LVC821AD,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC821 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 200MHz |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 7.3ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74LVC821AD,112 Overview
The flip flop is packaged in 24-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas the output. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 1.65V~3.6Vis used as the supply voltage. A temperature of -40°C~125°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74LVC series. Its output frequency should not exceed 200MHz Hz. The list contains 1 elements. As a result, it consumes 10μA of quiescent current without being affected by external factors. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74LVC821 family. A voltage of 2.7V is used to power it. Its input capacitance is 5pFfarads. This D flip flop belongs to the family of LVC/LCX/Z. It is part of the FF/Latchesbase part number family. As soon as 3.6Vis reached, Vsup reaches its maximum value. A total of 3.3V power supplies are needed to run it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.
74LVC821AD,112 Features
Tube package
74LVC series
3.3V power supplies
74LVC821AD,112 Applications
There are a lot of NXP USA Inc. 74LVC821AD,112 Flip Flops applications.
- ATE
- Communications
- Set-reset capability
- Pattern generators
- Matched Rise and Fall
- Clock pulse
- Common Clocks
- QML qualified product
- Storage Registers
- Divide a clock signal by 2 or 4