74LVC1G53DP-Q100H
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 15Ohm |
| Base Part Number | 74LVC1G53 |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Power Dissipation | 250mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 2 |
| Supply Type | Single |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 3.8ns, 3.8ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LVC1G53DP-Q100H Overview
As the electronic part is packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. Into the electrical component body are injected 8 pins. Multiplexers built on a SPDT switching circuit are built. A 1 circuit is present in this switch device. Using the 74LVC1G53 search parameter, you can discover variants of the switch. A 15Ohm internal resistance characterizes this multiplexer. The datasheets for the 8 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Digital switch that provides Single power at a cost-effective price. It is recommended to use 1.65V as the lowest voltage for the electrical part. This multiplexer would work with 40μA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. There are 2 inputs to be operated. This is one of the Automotive, AEC-Q100 series.
74LVC1G53DP-Q100H Features
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 300MHz
74LVC1G53DP-Q100H Applications
There are a lot of Nexperia USA Inc. 74LVC1G53DP-Q100H Analog Switches & Multiplexers ICs applications.
- Medical systems
- Battery Powered Systems
- Industrial
- Microprocessor Controlled Analog Systems
- Sample hold systems
- Audio and video routing
- Sample-and-hold systems
- Digital access cross connects
- Microwave transmission systems
- Isolation