74LV273N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV273 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1V |
| Load Capacitance | 50pF |
| Clock Frequency | 100MHz |
| Family | LV/LV-A/LVX/H |
| Current - Quiescent (Iq) | 160μA |
| Current - Output High, Low | 12mA 12mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 24 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 24 ns |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74LV273N,112 Overview
The package is in the form of 20-DIP (0.300, 7.62mm). The package Tubecontains it. There is a Non-Invertedoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Through Hole. A 1V~5.5Vsupply voltage is required for it to operate. It is operating at a temperature of -40°C~125°C TA. The type of this D latch is D-Type. JK flip flop is a part of the 74LVseries of FPGAs. You should not exceed 100MHzin the output frequency of the device. D latch consists of 1 elements. As a result, it consumes 160μA of quiescent current without being affected by external factors. There have been 20 terminations. D latch belongs to the 74LV273 family. It is powered from a supply voltage of 3.3V. A 3.5pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the LV/LV-A/LVX/Hfamily. There is a base part number FF/Latchesfor the RS flip flops. In this case, the maximum supply voltage (Vsup) reaches 5.5V. Keeping the supply voltage (Vsup) above 1V is necessary for normal operation. A total of 3.3V power supplies are needed to run it.
74LV273N,112 Features
Tube package
74LV series
3.3V power supplies
74LV273N,112 Applications
There are a lot of NXP USA Inc. 74LV273N,112 Flip Flops applications.
- Circuit Design
- ESD protection
- Supports Live Insertion
- Frequency Divider circuits
- Buffer registers
- ESCC
- Frequency Dividers
- Asynchronous counter
- Data Synchronizers
- Instrumentation