74HCT2G66DC,125
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT2G66 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 95Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 30ns, 44ns |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 36ns |
| Switch-off Time-Max | 53ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Height Seated (Max) | 1mm |
| RoHS Status | ROHS3 Compliant |
74HCT2G66DC,125 Overview
Shipping overseas is convenient with the electronic component packed in 8-VFSOP (0.091, 2.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Increasing operating temperature to around -40°C~125°C TA. In total, 8 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electronic part body is injected with 8 pins. A SPST - NO switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. Using the 74HCT2G66 search parameter, you can discover variants of the switch. This analogue multiplexer requires a voltage of 4.5V~5.5V when it drains from a single voltage supply.
74HCT2G66DC,125 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
74HCT2G66DC,125 Applications
There are a lot of Nexperia USA Inc. 74HCT2G66DC,125 Analog Switches & Multiplexers ICs applications.
- Audio signal routing
- Automatic test equipment
- PDH Multiplexers
- Optical Applications
- Digital access cross connects
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- ISDN NT1/TA
- Residential Gateways, Home Gateway/Router
- DSUs
- SONET/SDH ADM