74HC7731D,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC7731 |
| JESD-30 Code | R-PDSO-G16 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 4 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Family | HC/UH |
| Logic Type | Register, Multiplexed |
| Output Polarity | TRUE |
| Number of Bits per Element | 64 |
| Trigger Type | POSITIVE EDGE |
| fmax-Min | 20 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
74HC7731D,118 Overview
There is a 16-SOIC (0.154, 3.90mm Width) package embedded with the device. 16 is the total number of terminations on the chip. A Tape & Reel (TR) case is used to pack it. 5V is the operating supply voltage of the part. On this part, there are 4 elements. This electronic component is classified as HC/UH. Surface Mount is the way in which this component is mounted. -40°C~125°C is the range of operating temperatures for the device. Votage is provided within 2V~6V. It is part of the 74HC series of electrical components. If you use the 74HC7731 family, you can find parts that are similar. Please take note of the following additional aspects of this section: INDIVIDUAL CLOCK FOR EACH SHIFT REGISTER. This part should have a minimum supply voltage (Vsup) of at least 2V. The maximum supply voltage (Vsup) for this part should not be more than 6V.
74HC7731D,118 Features
Mounted in Surface Mount type.
Based on 74HC7731 family
74HC7731D,118 Applications
There are a lot of NXP USA Inc. 74HC7731D,118 Shift Registers applications.
- Interconnectors
- Remote control holding register
- temporary data storage
- ROM Chips
- Parallel data
- data transfer
- Parallel to serial converter
- Pattern Recognizers
- Output expansion
- Serial-to-parallel data conversion