74FCT16374CTPAG8
| Parameters | |
|---|---|
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TFSOP |
| Number of Pins | 48 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 5.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
74FCT16374CTPAG8 Overview
It is packaged in the way of TFSOP. The list contains 2 elements. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The power source is powered by 5V. A device of this type belongs to the family of FCT. It is mounted by the way of Surface Mount. This board is designed with 48pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 16bits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. It runs on 5Vvolts of power. The D flip flop has no ports embedded. For high efficiency, the supply voltage should be set to 5V. 500μAquiescent current consumed. Furthermore, it has POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NSas a characteristic. In this case, the high level output current is set to -32mA. 32mAis set as the low level output current. A temperature below 85°Cis recommended for operation. It should be higher than -40°Cwhen the system is operating. It operates with the minimal supply voltage of 4.5V. It is capable of supporting a maximum supply voltage of 5.5V. BUS DRIVERis the logic IC it uses. The T flip flop is equipped with 2functions . 48pins are provided on the D latch.
74FCT16374CTPAG8 Features
48 pins
16 Bits
5V power supplies
2 Functions
48 pin count
74FCT16374CTPAG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16374CTPAG8 Flip Flops applications.
- Bounce elimination switch
- Balanced Propagation Delays
- 2 – Bit synchronous counter
- Parallel data storage
- Storage Registers
- Memory
- Latch
- Safety Clamp
- Pattern generators
- Automotive