74FCT163374CPVG8
| Parameters | |
|---|---|
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -8mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 100nA |
| Family | FCT |
74FCT163374CPVG8 Overview
SSOP package contains the device. There are 48 terminations on the chip. A voltage of 3.3V is specified for the part's operating supply. There are 2 elements on this part. There are 48 pins on the device. Mounting by Surface Mount is recommended. Electronic components belong to the FCT group. In terms of supply voltage, this chip operates within the range of 3.3V. This section has the following additional features: MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V. The total number of IC chip bits is 16. The total number of pins is 48. Under temperatures below 85°C, it is recommended to use it. In order for this device to function, the value should not be less than -40°C. A voltage of 3.6V is employed as the supply voltage. There is a voltage applied to the supply that is greater than 2.7V. A quiescent current of 100nA is used to run the device. FF/Latches is its subcategory. In order to package the part properly, TAPE AND REEL is used.
74FCT163374CPVG8 Features
With 48 pins
Operate supply voltage at 3.3V
Quiescent Current at 100nA
Packing Method : TAPE AND REEL
74FCT163374CPVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163374CPVG8 Shift Registers applications.
- Serial-to-parallel data conversion
- Data manipulation
- Parallel to serial converter
- 7-segment display control
- data manipulation
- store data in digital form
- Serial to parallel converter
- data transfer
- Delay Line
- Remote control holding register