74FCT163374APVG
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 100nA |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -8mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT163374APVG Overview
This device can be found embedded within the package SSOP. Chip terminations add up to 48. The part operates at 3.3V voltage. On this part, there are 2 elements. It is equipped with a pin count of 48. Surface Mount is recommended for mounting. In the FCT series, the electronic component belongs. The operating supply voltage of this chip is noted to be within the range 3.3V. Additional aspects of this section are as follows: MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V. It has a total of 16 pins. In total, there are 48 pins on it. It should be used below 85°C. In order for this device to function, the value should not be less than -40°C. Under 3.6V, this voltage is employed. It is important to note that this supply voltage is higher than 2.7V. There is a quiescent current of 100nA flowing through it. The subcategory in which it falls belongs to is FF/Latches.
74FCT163374APVG Features
With 48 pins
Operate supply voltage at 3.3V
Quiescent Current at 100nA
74FCT163374APVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163374APVG Shift Registers applications.
- Sequence generator
- Serial-to-parallel data conversion
- Dual-rank shift, hold, and bus applications
- Delay Line
- data transfer
- Data Format Converters
- ROM Chips
- Interconnectors
- store data in digital form
- Output expansion