74FCT163374APAG
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 6.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -8mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| Radiation Hardening | No |
74FCT163374APAG Overview
In package TSSOP, there is an embedded device. Chip terminations add up to 48. Parts with a 3.3V operating supply voltage are specified. On this part, there are 2 elements. 48 pins are present on the device. It is recommended that the mount should be done by Surface Mount. In this case, the electronic component belongs to the FCT. As noted, this chip operates within the range of 3.3V. Additional aspects of this section include: MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V. IC chips contain a total of 16 bits. The total number of pins is 48. A temperature below 85°C is recommended for its use. It should not be less than -40°C when operating this device. A voltage of 3.6V is used to supply this voltage. It is important to note that this supply voltage is higher than 2.7V. As a result, it runs at a quiescent current of 100nA. It belongs to the subcategory of FF/Latches.
74FCT163374APAG Features
With 48 pins
Operate supply voltage at 3.3V
Quiescent Current at 100nA
74FCT163374APAG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163374APAG Shift Registers applications.
- Flash Memory
- Delay Line
- store data in digital form
- data transfer
- ROM Chips
- 8-bit data storage
- Generate time delay toward digital circuits
- data manipulation
- Sequence generator
- Parallel data