74F175PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Clock Frequency | 140MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 34mA |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 9.5 ns |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74F175PC Overview
The package is in the form of 16-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. As configured, the output uses Differential. Positive Edgeis the trigger it is configured with. Through Holeis in the way of this electric part. A supply voltage of 4.5V~5.5V is required for operation. Currently, the operating temperature is 0°C~70°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74Fseries of FPGAs. Its output frequency should not exceed 140MHz. In total, there are 1 elements. This process consumes 34mA quiescents. 16terminations have occurred. It is powered by a voltage of 5V . This D flip flop belongs to the family of F/FAST. As soon as 5.5Vis reached, Vsup reaches its maximum value.
74F175PC Features
Tube package
74F series
74F175PC Applications
There are a lot of Rochester Electronics, LLC 74F175PC Flip Flops applications.
- Latch-up performance
- Bus hold
- Parallel data storage
- ESD performance
- Frequency Divider circuits
- Divide a clock signal by 2 or 4
- Load Control
- Event Detectors
- Guaranteed simultaneous switching noise level
- Circuit Design