74ACQ374PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACQ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 90MHz |
| Family | AC |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74ACQ374PC Overview
It is embeded in 20-DIP (0.300, 7.62mm) case. It is included in the package Tube. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. The supply voltage is set to 2V~6V. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. The 74ACQseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 90MHz. In total, it contains 1 elements. Despite external influences, it consumes 40μAof quiescent current. The number of terminations is 20. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the ACfamily of D flip flop. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be kept above 2V. There are 2 ports embedded in the flip flops.
74ACQ374PC Features
Tube package
74ACQ series
74ACQ374PC Applications
There are a lot of Rochester Electronics, LLC 74ACQ374PC Flip Flops applications.
- Frequency division
- Asynchronous counter
- Pattern generators
- ESCC
- Balanced Propagation Delays
- Individual Asynchronous Resets
- Memory
- Registers
- Modulo – n – counter
- Parallel data storage