72V825L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V825L15PFI Overview
This package is included in TQFP .Mounting it in Surface Mount is recommended.A supply voltage of 3.3V is capable of producing high efficiency.FIFO means contains 128 terminations.Operation pins are 128 .In order to operate it, it requires 60mA volts of current.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.An input voltage of 3.6V V is the maximum that FIFO memory can handle.Approximately 128 pins are attached to it.A frequency of 66.7MHz is sufficient to maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .
72V825L15PFI Features
FIFOs category
Frequency at most
72V825L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V825L15PFI FIFOs Memory applications.
- Analog-to-digital converters
- Video Processing
- SPI Bus Flash Memory Device
- High-speed graphics pixel buffer
- Notebook
- One assembly
- Data-acquisition systems
- Telecommunication
- IP Radio
- Test Equipment