72V3672L15PFI
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 120 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 |
| Number of Terminations | 120 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 120 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX36 |
| Density | 576 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72V3672L15PFI Overview
You can find FIFO memory chip in the TQFP package.It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains 120 terminations.120 pin is used for operation.A voltage of 3.3V should be used for FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.The memory logic's maximum supply voltage is 3.6V volts.There are a total of 120 pins on this FIFO memory IC.When the frequency is set to 66.7MHz , the system can maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .
72V3672L15PFI Features
Frequency at most
72V3672L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V3672L15PFI FIFOs Memory applications.
- Fabrication Site
- Queues for communication systems
- Temporary storage elements
- SPD for DDR3 Memory Modules
- Multi-stage synchronizer
- Rate buffers
- Computers
- High-speed graphics pixel buffer
- Buses
- Extended product-change notification