72V291L10TF
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 128KX9 |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V291L10TF Overview
You can find FIFO memory chip in package LQFP .Memory IC's recommended mounted way is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.In FIFO means, there are 64 terminations.64 pin is used for operation.In order to operate FIFO design, a maximum current of 55mA is required.A 3.3V supply voltage will ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.The FIFO memory IC is equipped with a total of 64 pins.During normal operation, the FIFO memory's maximum value is 100MHz .
72V291L10TF Features
FIFOs category
Frequency at most
72V291L10TF Applications
There are a lot of Integrated Device Technology (IDT) 72V291L10TF FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- Emulators
- Optical memories
- Video time base correction
- HDD
- Consumer
- Video
- One assembly
- Code converters
- Magnetic memories