72V291L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 128KX9 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V291L10PF Overview
The TQFP package contains FIFO memory chip.Mounting it Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.The number of terminations in FIFO means is 64 .There are 64 pins for operation.There is a maximum current requirement of 55mA for its operation.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at a very low supply voltage, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V volts.Approximately 64 pins are attached to it.In the presence of a 100MHz frequency, it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .
72V291L10PF Features
FIFOs category
Frequency at most
72V291L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V291L10PF FIFOs Memory applications.
- Game Consoles
- Video
- Alarm System
- Measurement Equipment
- Character generators
- Buses
- PC peripheral
- Microprogramming
- Extended product life cycle
- Tape controllers