72V271LA15TF
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V271LA15TF Overview
This package is included in TQFP .It is recommended that memory IC be mounted in the Surface Mount direction.An input voltage of 3.3V results in high efficiency.FIFO means contains 64 terminations.In the case of the operation pins, they are 64 pins.In order for FIFO design to operate, a maximum current of 55mA is required.In order to maximize efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.It has a total of 64 pins on it.A frequency of 66.7MHz is sufficient to maintain good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.The gadget can also generate a value of RETRANSMIT; AUTO POWER DOWN .
72V271LA15TF Features
FIFOs category
Frequency at most
72V271LA15TF Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA15TF FIFOs Memory applications.
- SPI Bus Flash Memory Device
- Microprogramming
- Controlled baseline
- Optical memories
- Telecommunication
- Multimedia
- Data-acquisition systems
- Extended product life cycle
- Desktop Computers
- Consumer Systems