72V271LA15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V271LA15PFI8 Overview
FIFO memory chip is included in the TQFP package.Tape & Reel case is used for packaging.A Surface Mount mounting method is recommended.A supply voltage of 3.3V is capable of producing high efficiency.FIFO means contains 64 terminations.There are 64 pins on the operation pins.In order for FIFO design to operate, a maximum current of 55mA is required.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.An operating temperature of 85°C °C is necessary for stable operation.It is contained within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.Approximately 64 pins are attached to it.When the frequency is set to 66.7MHz it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .The gadget can also generate a value of RETRANSMIT; AUTO POWER DOWN .
72V271LA15PFI8 Features
FIFOs category
Frequency at most
72V271LA15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA15PFI8 FIFOs Memory applications.
- Fabrication Site
- Desktop Computers
- Multi-stage synchronizer
- SPI Bus Flash Memory Devices
- GPS Offender Tracking
- Application that requires re-writable nonvolatile parameter memory
- Video
- Routers
- Portable Information Devices
- Product traceability