72V2101L20PF8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 256KX9 |
| Density | 2.3 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V2101L20PF8 Overview
FIFO memory chip is included in the TQFP package.It comes in a Tape & Reel package.The recommended mounting way is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.I found that it has 64 terminations in FIFO means.Operation pins are 64 .FIFO requires a minimum of 55mA current to operate.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is self-contained in FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO may operate at a very low supply voltage, such as 3.15V V.FIFO memory can handle a maximum supply voltage of 3.45V V.It consists of a total of 64 pins.Despite a frequency of 50MHz , it is capable of maintaining good accuracy.For regular operation, the memory logic's maximum value is 50MHz .It is also possible to generate RETRANSMIT; AUTO POWER DOWN using this FIFO memory.
72V2101L20PF8 Features
FIFOs category
Frequency at most
72V2101L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V2101L20PF8 FIFOs Memory applications.
- Network switching/routing
- General Data Collection Applications at Low-Temperatures
- Temporary storage elements
- Industrial Systems
- Cardiac Monitoring Device
- Signal processing
- Product traceability
- Multimedia
- Network bridges
- Communications Systems