72V06L35J8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 75mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 16KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 147456 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V06L35J8 Overview
FIFO memory chip can be found in the LCC package.Surface Mount is memory IC's recommended mounting method.If the supply voltage is set to 3.3V , high efficiency can be achieved.I found that it has 32 terminations in FIFO means.32 pins are the operation pins.FIFO requires a minimum of 75mA current to operate.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 70°C °C is necessary for stable operation.It is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.In some cases, FIFO operates at a very low supply voltage, such as 3V V.The memory logic's maximum supply voltage is 3.6V volts.As a result, it contains a total of 32 pins.A clock on the FIFO memory IC runs at a frequency of 22.2MHz .
72V06L35J8 Features
FIFOs category
Clock frequency of 22.2MHz
72V06L35J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V06L35J8 FIFOs Memory applications.
- PC peripheral
- Game Consoles
- Data communications
- Firmware loaders
- Queues for communication systems
- IP Camera Buffer
- Communications Systems
- Computer Systems
- Consumer Systems
- Signal processing