72T1885L4-4BB
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 144 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 100MHz |
| Frequency (Max) | 225MHz |
| Access Time | 3.4 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.05A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 4.44 ns |
| Height Seated (Max) | 1.97mm |
| Length | 13mm |
| Width | 13mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72T1885L4-4BB Overview
This package is included in BGA .Mounting it Surface Mount is recommended.If the supply voltage is set to 2.5V , high efficiency can be achieved.FIFO means contains 144 terminations.These are the 144 pins for operation.In order to operate FIFO design, a maximum current of 60mA is required.When the supply voltage is set to 2.5V , the FIFO's maximum efficiency is achieved.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.This gadget is self-contained in?FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 2.375V V.An input voltage of 2.625V V is the maximum that FIFO memory can handle.Currently, it has 144 pins.During regular operation, the FIFO memory's maximum value is 225MHz .The FIFO memory IC runs at a frequency of 100MHz .
72T1885L4-4BB Features
FIFOs category
Frequency at most
Clock frequency of 100MHz
72T1885L4-4BB Applications
There are a lot of Integrated Device Technology (IDT) 72T1885L4-4BB FIFOs Memory applications.
- Digital buffering
- Fabrication Site
- Cardiac Monitoring Device
- High-speed disk
- SPD for DDR3 Memory Modules
- Buses
- Product traceability
- Test Equipment
- Switches
- SPI Bus Flash Memory Device