72251L25PF
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72251L25PF Overview
FIFO memory chip is contained in the TQFP package.The recommended mounting method for this FIFO products is Surface Mount .An input voltage of 5V results in high efficiency.A total of 32 terminations are contained within FIFO means.These are the 32 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 50mA .In order to maximize efficiency, the supply voltage should be set to 5V .It operates at 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC has a total of 32 pins.It is capable of maintaining good accuracy with a frequency of 40MHz .For regular operation, the memory logic's maximum value is 40MHz .There are normally 5V power supplies attached to the component.
72251L25PF Features
FIFOs category
Frequency at most
72251L25PF Applications
There are a lot of Integrated Device Technology (IDT) 72251L25PF FIFOs Memory applications.
- Video Processing
- Programmable Logic Controller
- Desktop Computers
- Data communications
- Battery Charger
- Seismic Data Collection at Extreme Temperatures
- Fabrication Site
- Wireless
- Data
- Optical memories