72241L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 4.5kB |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 9b |
| Organization | 4KX9 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72241L15PF Overview
This package is included in TQFP .There is a memory of 4.5kB on the FIFO chip that can be used to store applications and data.Surface Mount is memory IC's recommended mounting method.When the supply voltage is 5V there is the possibility of high efficiency.The number of terminations in FIFO means is 32 .There are 32 pins for operation.FIFO requires a minimum of 35mA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is self-contained in FIFOs .In this part, the memory type is OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.The FIFO memory IC has a total of 32 pins.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.Normaly, the component is powered by 5V power supplies.Through the use of 1 circuits, FIFO memory chip is able to achieve enhanced flexibility.
72241L15PF Features
4.5kB memory size
FIFOs category
Frequency at most
72241L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72241L15PF FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- Network switching/routing
- Extended product-change notification
- Emulators
- Multimedia
- SPI Bus Flash Memory Device
- Rate buffers
- Data
- Alarm System
- SPI Bus Flash Memory Devices