72221L10J
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72221L10J Overview
You will find FIFO memory chip in the PLCC package.Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains a total of 32 terminations.Operation pins are 32 .In order to operate it, it requires 35mA volts of current.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.This FIFO memory IC is equipped with 32 pins in total.It is capable of maintaining good accuracy with a frequency of 100MHz .A FIFO memory's maximum value of 100MHz can be used for regular operation.Normally, the component owns 5V power supplies.Through the use of 1 circuits, FIFO memory chip is able to achieve enhanced flexibility.
72221L10J Features
FIFOs category
Frequency at most
72221L10J Applications
There are a lot of Integrated Device Technology (IDT) 72221L10J FIFOs Memory applications.
- Computers
- HDD
- Communications
- Event Recorder
- Down-Hole Energy Drilling
- IP Radio
- PC peripheral
- Tape controllers
- Controlled baseline
- Game Consoles